therma-stor-products-grou ts-261b Manuale Utente

8

Figure 17: Electrical schematic

Figure 16: Twist tabs

Twist 
tabs

Remove 
one of 
these 
base 
supports

8.  Using a pliers, twist the tabs of the base supports to  

align with the slots. Remove only one of the base  
supports (see below). Spread the base apart slightly  
to remove the impeller fan.

9.  Remove the four 4 mm machine screws and lock  

washers securing the impeller fan.

0. Reverse this procedure to reassemble with the new  

impeller fan.