Adam Equipment 302666242 Manuale Utente
© Adam Equipment Company 2011
Page
19
6.4 PLU (Product Look Up)
Product Look-Up (PLU) numbers are used to store information about the
commonly used items. The Tare Weight, Description of the product and Unit
Weights for a particular item are recalled by entering the PLU number for
ease of operation.
The scale is capable of storing values for the Tare weight, Description and
Unit Weight for a maximum of up to 100 PLU numbers.
Tare Weight value is required for calculating the Net Weight where a
container is used during weighing. Descriptions are used for sending data
over RS-232 for viewing or printing and Unit Weight is used for parts
counting.
These data should be entered against a particular PLU before the
weighing process starts so that the desired PLU’s can be recalled
during the weighing process. The data can be stored and recalled
manually or by sending data over RS-232 Interface.
commonly used items. The Tare Weight, Description of the product and Unit
Weights for a particular item are recalled by entering the PLU number for
ease of operation.
The scale is capable of storing values for the Tare weight, Description and
Unit Weight for a maximum of up to 100 PLU numbers.
Tare Weight value is required for calculating the Net Weight where a
container is used during weighing. Descriptions are used for sending data
over RS-232 for viewing or printing and Unit Weight is used for parts
counting.
These data should be entered against a particular PLU before the
weighing process starts so that the desired PLU’s can be recalled
during the weighing process. The data can be stored and recalled
manually or by sending data over RS-232 Interface.
6.4.1 STORING PLU’S MANUALLY
DISPLAYS
ACTIONS
Weight Unit weight Count
REMARKS
Press [Tare/Zero]
if required.
if required.
“O.0000” “ 0“
“ 0“
The scale is
zeroed.
zeroed.
Note:
Enter or determine the Tare Weight when a container is to be used (see
section 6.2 of this User Manual). If a Tare value is used, the scale will be in
the NET mode.
Enter or determine the Unit Weight as described in section 6.3.1 and 6.3.2 of
this User Manual.
The Tare and Unit Weight to be stored can be either taken from a weighing in
process or by manual entry of data.
section 6.2 of this User Manual). If a Tare value is used, the scale will be in
the NET mode.
Enter or determine the Unit Weight as described in section 6.3.1 and 6.3.2 of
this User Manual.
The Tare and Unit Weight to be stored can be either taken from a weighing in
process or by manual entry of data.