Adam Equipment 302666242 Manuale Utente
© Adam Equipment Company 2011
Page
6
3.0 INSTALLATION
3.1 LOCATING THE SCALES
•
The scales should not be placed in a location
that will reduce the accuracy.
that will reduce the accuracy.
•
Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning
vents.
in direct sunlight or near air conditioning
vents.
•
Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
must be rigid and not vibrate.
•
Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
near large users of electricity such as welding
equipment or large motors.
•
Do not place near vibrating machinery.
•
Avoid high humidity that might cause
condensation. Avoid direct contact with water.
Do not spray or immerse the scales in water.
condensation. Avoid direct contact with water.
Do not spray or immerse the scales in water.
•
Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
opening doors. Do not place near open
windows or air-conditioning vents.
•
Keep the scales clean. Do not stack material
on the scales when they are not in use.
on the scales when they are not in use.
3.2 SETTING UP THE SCALES
SETTING UP THE LOCAL SCALE
•
The CBD Series comes with a stainless steel platform packed
separately.
•
Place the platform in the locating holes on the top cover.
•
Do not press with excessive force as this could damage the load
cell inside.
•
Level the scale by adjusting the four feet. The scale should be