Acura 2010 zdx Manuale Utente

Pagina di 181
Navigation System
127
System Initialization
System Initialization
If for any reason you lose power to the 
navigation system (e.g., the battery was 
disconnected), the navigation system 
will require initialization. Once 
completed, your system will be ready to 
use.
This initialization requires the 
following:
• Entry of the 5-digit anti-theft security 
code to “unlock” the audio and 
navigation system.
• GPS initialization (may not be needed 
depending on the length of time the 
system was without power). (See 
GPS Initialization on page
• Map matching to align the GPS 
coordinates to a place on the map 
(displays current street at the bottom 
of the map). (See Map Matching on 
page
.)
Entering the Security Code
If the battery goes dead or is 
disconnected for any reason, you will 
have to enter a security code for the 
audio and navigation system before you 
can use it again.
When you purchased the vehicle, you 
should have received one card 
containing the navigation system’s 
security code and serial number. Keep 
this card in a safe place in case you need 
the code. If you lose the card, you must 
obtain the security code from your 
dealer.
Enter the 5-digit security code in 
accordance with the owner’s manual for 
your vehicle. If you do not enter the 
security code, the navigation and audio 
voice will not function.
NOTE:
The anti-theft security code is unrelated 
to your optional navigation system PIN 
(for Address Book or Home Address).
GPS Initialization
Depending on the length of time the 
battery was disconnected, your system 
may require GPS initialization. If it 
does, the following screen appears:
If this procedure is not necessary, the 
system proceeds directly to the 
Disclaimer
 screen (see page
During initialization, the system 
searches for all available GPS satellites 
and obtains their orbital information. 
During this procedure, the vehicle 
should be out in the open with a clear 
view of the sky.
2010 ZDX