Elo TouchSystems JH 10T08 Manuale Utente

INB100014-1 (Rev 19)

IND100078-10

1. Most of our products are intended for various methods of installation or mounting

   (panel mounting, bracket mounting, ceiling/wall mounting etc.); for details, please see the relevant

   mechanical drawings.

2. Adequate ventilation is a necessary prerequisite for the life of the product. The air inlet and outlet

    openings must definitely be kept clear; coverings which restrict ventilation are not permissible.

3. Do not install the unit in a horizontal position (laying down), as this will cause heat to build up

    inside the display which will damage the LCD Panel. To prevent this problem we recommend

    installing the unit in a vertical position (±30 degrees) to improve the airflow through the unit. 

4. Exposure to direct sunlight can cause a considerable increase in the temperature of the unit, and

     might under certain circumstances lead to overtemperature. This point should already be taken

     into consideration when the bridge equipment is being planned (sun shades, distance from the

     windows, ventilation, etc.)

5. Space necessary for ventilation, for cable inlets, for the operating procedures and for

    maintenance, must be provided.

6. To further improve the cooling of the unit we recommend installing Cooling Fans underneath

     blowing upwards into the unit air inlet. This may be required in high temperature applications

     and also when there is reason to expect temperature problems due to non-optimal way of

     mounting(Ref.2-5).

7. If the push buttons of the product are not illuminated, an external, dimmable illumination

    (IEC 60945, 6.5.c, e.g. Goose neck light is required for navigational use.

8. Information about necessary pull-relievers for cables is given in the installation drawings. 

    Attention must be paid to this information so that cable breaks will not occur, e.g. during service

    work.

Please be aware of the risk of breaking or bending the brightness knob. The brightness knob 

should be free of any obstruction. 

General Installation Recommendations