Ericsson 230i Manuale Utente

ob

It is possible to subscribe the handset manually to the 230i base station. It is 
also possible to subscribe theDT200 handset to a base station other than the 
230i base station and even to subscribe a different handset to the 230i base sta-
tion. The three different types of subscribing are described below. 

Subscribing a DT200 handset to the 230i base station. To subscribe a 
handset you need the base station PIN code. This PIN code is secret and pre-
vents other handsets from subscribing to the base station without your 
approval. If the handset does not have a subscription, it automatically enters 
the subscription mode when it is switched on. In this case, the handset dis-
plays 

 first and then 

 appears. If so, you can skip 

step two and three of the procedure below. 

Press the 

 button on the top right side of the base station for at least 

two seconds.
The base station now remains in subscription mode for five minutes.

Select 

 and press 

.

 or

 is displayed. 

If 

 is displayed, enter the PIN code for the handset (see “Overview 

of PIN and other codes” on page 23).

 is displayed.

Enter the PIN code for the base station (at delivery the PIN code is 1111, 
see also page 23).

Press 

 to confirm.

 is displayed.

Wait until 

 is displayed for a short time. 

The handset is now connected to the base station. You can see its internal 
phone number on the right-hand side of the display.

If the following message is displayed, try to subscribe again:

: the base station PIN code you have entered may be incor-

rect, or the base station already has eight handset subscriptions. To add a 
handset you have to delete the subscription of another handset. See “Delet-
ing a subscription on the base station” below for more details.

At this point you may wish to change the menu language of the handset. See 
“Language” on page 19 for more details.

Select 

 and press 

.

 is displayed. 

Enter the authentication code or the PIN code of the base station.
Each digit that you enter is shown as 

 for security reasons.