Ericsson 230i Manuale Utente

Press 

 to confirm.

is displayed briefly and then 

 appears.

Ensure that the base station is ready to subscribe as indicated in the appro-
priate base station manual. For example, for the cordless phone 230i base 
station you have to press 

 for at least three seconds.

Wait until 

 is displayed for a short time. 

The handset is connected to the base station. You can see its internal phone 
number on the right-hand side of the display.

If you get the following message, try to subscribe again:

: the base station PIN or authentication code you have 

entered may be incorrect, or the base station cannot add another 
subscription.

Subscribing another handset type to the base station. Your base station 
functions can be fully utilized when used in combination with a DT200 hand-
set. If it is used with another type of handset, there are a few functions that 
will not work.

Please refer to the appropriate handset manual for subscribing another type of 
handset to the base station. To initiate subscription, you have to press the 

 button on the base station for at least three seconds. The red light on 

the top of the base station will then be on. The base station will remain in the 
subscription mode for about 5 minutes.

If a subscription is no longer required, you can remove it from the handset’s 
subscription list.

You can remove a handset subscription from the base station if that handset no 
longer needs to connect to the base station.

The handset can connect to several base stations. It can select a base station 
automatically when it has been out of range or is switched on. You can also 
specify a base station for the handset to connect to.

Selection priority. The handset can select a base station automatically when 
it has been out of range or is switched on. In this case, it searches for the base 
stations in the order of priority starting with the first one on the subscription 
list. If you wish to change the order of your subscription list, the base station 
names can be re-arranged with this menu option.

You can rename each subscription entry. The name is shown in the display 
when the handset is connected to that base station and on standby.

The handset can display several special characters. Please refer to “About the 
phone book” on page 14 for more details.