Adam Equipment cbw 6 Manuale Utente

 

 

 

•  Checkweighing facility can be set up for Parts Counting by 

entering values as Low and High Limits to be keyed in by the 
user. The limits are displayed in PCS. 

 
 

• Press [Func] to enter the Parts Counting mode. Press 

 to fix a sample size. Press [Limit] and enter the 

numeric values for high and low limits following the same 
procedure as stated in the earlier section. 

 

  

 

•  The weight must be greater than 20 scale divisions for the check-

weighing to operate.   

 

•  To disable the Checkweighing function, enter zero into both limits 

by pressing [Limit/Î] to recall the current settings.  

 

•  When the current limits are shown, press [Func/C] to clear the 

settings and then press [Zero/Enter] to store the zero values. 

 

6.7  ACCUMULATED TOTAL  
 

•  The scale can be set to accumulate when a weight is added to the 

scale automatically or manually by pressing [Print].  

   

•  See Section 7.3 on PARAMETERS for details. The accumulation 

function is only available when weighing.  It is disabled during 
percent weighing or parts counting. 

 

•  The accumulated weights will be stored in the master unit of the 

scale, i.e. kg or lbs. 

 

•  If at any time the weighing units are changed, the accumulated 

data will be lost. 

12