Adam Equipment cbw 6 Manuale Utente

•  When the scale has been set to Automatic Accumulation the 

value is stored in memory automatically.   

 

 

•  Add a weight to the scale. The beeper will sound when the scale 

is stable indicating the value is accepted.  Remove the weight. 

 

•  The display will show "ACC 1" and then the total in the memory 

before it returns to zero.   Adding a 2

nd

 weight will repeat the 

process. 

 

 

•  While the weight is on the scale, press the [Print] key to show the 

values immediately- first the accumulation number "ACC x" and 
then the total will be shown.  In this case the scale will not show 
the value when the weight is removed.  

 

•  In all cases the scale must return to zero or a negative number 

before another sample can be added to the memory.  

 

•  More products can be added and [Print] be pressed again. This 

can continue for up to 99 entries till the capacity of display is 
exceeded. 

 

 

 

The parameters can be chosen by the user to set the scale to: 

 

•  Display the weight in other increments of weight to minimise the 

affects of vibration, wind or other environmental conditions. 

 

•  Control the back light on the display.  It may be necessary to turn 

the backlight off to maximise battery life. 

 

•  Set the Accumulation to Automatic, manual or set the RS-232 

interface to continuously print the weight. 

 

•  To enable the accumulation when [Print] is pressed or to disable 

it. 

 

•  Set a range for auto zero. 

 

•  Select another weighing unit than the standard. 

 

•  Set the check weighing alarm. 

 

•  Set the speed. 

14