ATTO Technology 2400c-r-d Manuale Utente

18

1

If you are not already in 
the ExpressNAV 
interface, type the IP 
address of your 
FibreBridge in a 
standard browser as 
found in 

Enter Here, 

type in your user name 
and password, and click 
OK.

1

The 

Status page 

appears.

2

From the ExpressNAV 
main menu, click on the 
Mapping menu item on 
the left side of the 
screen.

3

The 

Mapping page 

appears. Wait for the 
automatic scan for devices to complete.

4

Click 

All the commands necessary to enable 
mapping and the command 
saveconfiguration norestart are performed.

1

If you are not already in the ExpressNAV 
interface, type the IP address of your 
FibreBridge in a standard browser as found in 

Here, type in your user name and password, 
and click 

OK.

1

The 

Status page appears.

2

From the ExpressNAV main menu, click on the 
Mapping menu item on the left side of the 
screen.

3

The 

Mapping page appears. Wait for the 

automatic scan for devices to complete.

4

Select the devices from the box on the right 
hand side of the screen and drag to the 
appropriate LUN on the left.

5

Click 

Submit. All the commands necessary to 

enable mapping and the command 
saveconfiguration norestart are performed 

The FibreBridge has a unique Port name for each 
Fibre Channel port. By default, each Fibre 
Channel port also has a separate unique Node 
name: the host computer perceives the 
FibreBridge as two separate entities, allowing 
mapping of a different set of logical units to each 
FC port.
You may use a combination of the Command 
Line Interface and ExpressNAV to change the 
default setting to create a single Node name for 
the FibreBridge and map devices to that node.

1

Connect to the FibreBridge using the 
Command Line Interface as described in 

 on page 25.

2

At the 

Ready prompt, type 

set FCMultiNode disabled

Note

3

Press 

Enter.

4

Type 

5

Press 

6

Follow the directions in 

 or