TEAC NP-H750 Manuale Utente
27
27
ENGLISH
You can play audio files stored on a USB flash drive by con-
necting it to this unit.
For details on playable files, see page 8.
necting it to this unit.
For details on playable files, see page 8.
1
Press the SOURCE button repeatedly to
select “USB/iPod”.
p
You can also use the USB/iPod button to select this
directly.
directly.
p
“Not Connected” will be displayed if no USB flash
drive is connected.
drive is connected.
2
Connect a USB flash drive to the unit.
3
Select the file you want to play.
For details, see page 29.
4
Press the play/pause button (y/9) or
ENTER button to start playback.
p
If you press the / button when a file is
displayed, playback will also start.
displayed, playback will also start.
Listening files on a USB flash drive (1)
About the ErP
This product is compliant with the European ErP Standby
Power Regulation. In order to comply with this regulation, the
automatic power saving function of this unit is set to 30 min-
utes when shipped new, so the unit will automatically enter
standby if 30 minutes pass under the conditions shown in the
following table.
However, when “On” is selected for the network standby set-
ting (page 37), this function is not active. (The default
network standby setting is “Off”.)
Power Regulation. In order to comply with this regulation, the
automatic power saving function of this unit is set to 30 min-
utes when shipped new, so the unit will automatically enter
standby if 30 minutes pass under the conditions shown in the
following table.
However, when “On” is selected for the network standby set-
ting (page 37), this function is not active. (The default
network standby setting is “Off”.)
p
When you turn on the unit, the selected source is the
one selected before the unit was put into standby.
one selected before the unit was put into standby.
p
During playback in iPod mode, if you put the unit into
standby by pressing the STANDBY/ON button, the next
time the power is turned on again, the unit will be in
iPod mode and playback will start automatically when
an iPod/iPhone/iPad is connected. Playback will not
start automatically in other modes.
standby by pressing the STANDBY/ON button, the next
time the power is turned on again, the unit will be in
iPod mode and playback will start automatically when
an iPod/iPhone/iPad is connected. Playback will not
start automatically in other modes.
Status
AirPlay,
iPod/
iPhone/
iPad
iPod/
iPhone/
iPad
USB flash
drive
drive
Media
player
Internet
player
Internet
External
input
input
No
connection
connection
Stopped/
paused
paused
*
No input
signal
signal
-
-
-
External input: USB Audio In, COAXIAL, OPTICAL, PHONO,
AUX 1/2
Automatic power saving function active
- Automatic power saving function not active
* Compatible only with AirPlay
/ Not applicable
* Compatible only with AirPlay
/ Not applicable