Polycom cx400 Manuale Utente

 Getting Started with Your Polycom® CX400 Cordless Phone

1 - 5

Place the handset into the cradle.

While the phone is charging, the cradle’s left-hand charging LED is steady 

red and, if the handset is turned on, the handset status LED is green. When 

the phone is completely charged, the cradle’s charging LED turns off. This 

may take 1 to 2 hours or more. The handset status LED stays green as long 

as the handset is on and the battery retains a charge.

You may proceed to the next section, 

, without waiting for the handset battery to fully charge.

The process of pairing the handset and cradle associates a specific handset 

with a specific cradle. This avoids interference when several Polycom CX400 

cordless Phones are used within range of one another.
The right-hand green LED on the front of the cradle indicates whether the 

handset is paired with the USB cradle. The mapping is:

• Steady green—Paired

• Fast flashing green—Waiting for pairing

• Slow flashing green—No radio frequency link established (The handset 

may be turned off or may be out of range of the cradle.)

When the handset status LED is flashing red, return it to the cradle to recharge.