Philips HP3641 Manuale Utente

To treat your upper back and shoulders, place the appliance behind a chair or other seat, 

with the lamp housing in horizontal position, and sit down comfortably with your back 

towards the appliance. (Fig. 9)

To treat your back, place the appliance beside a chair or stool, with the lamp housing in 

vertical position, and sit down comfortably with your back towards the appliance. (Fig. 10)

To treat the hip and upper leg area, place the appliance beside a chair, with the lamp housing 

in horizontal position, and sit down comfortably.  (Fig. 11)

  

 Adjust the lamp housing

Turn the height adjustment ring to the left, pull the lamp housing up or push it down to the 

desired height and then lock it into position by turning the ring to the right. (Fig. 1)

To tilt the lamp housing upwards or downwards, grasp it by its handgrips and move it to the 

desired position. (Fig. 1)

You can also turn the lamp housing to horizontal or vertical position by grasping it by the 

handgrips and turning it to the required position. (Fig. 1)

Make sure the pedestal base is horizontal. If it is placed at an angle, the appliance will switch 

off automatically. (Fig. 15)

  

 Sit or lie down at the right distance from the appliance.

At a distance of 40-50cm to the body, the InfraCare treats an area of about 40cm by 60cm. At a 

larger distance, the area treated becomes larger and the infrared light and therefore the warmth 

less intense. At a smaller distance, the area treated is smaller and the infrared light and therefore 

the warmth more intense.

Make sure the distance between your body and the appliance is large enough to prevent 

accidental contact with the hot filter.

Choose a distance at which the heat is comfortable. 

The duration of the treatment depends on the person to be treated and the type of use. We 

recommend a few short treatments a day, e.g. 2 treatments of 15 minutes, on a number of 

consecutive days to get a result.
Note:Practice has shown that a few short treatments a day produce a better result than one longer 

treatment.
Always consult your doctor in case of doubt!

 1 

 Insert the plug into a wall socket.

The on/off button (A) and the timer buttons (D) blink for 1 minute, the maximum intensity 

button (B) lights up and 00 blinks on the display.  (Fig. 16)

  

 Set the desired treatment time by pressing the + or - timer button. Keep the button pressed 

to adjust the time more quickly.

  

 Adjust the light intensity of the lamp by pressing one of the intensity buttons. If you do not 

press any of these buttons, the lamp will operate at its default setting, which is maximum 

intensity.

  

 Switch the appliance on by pressing the on/off button.

,

,

,

,

,

,

,

-

-

-

,

8