Motorola motonav t815 Manuale Utente

Pagina di 63
 
14 
5 – Using Accessories
 
 
Important: Read Before Setup 
 
Always use the supplied mounting hardware. 
 
An  air  bag  inflates  with  great  force. DO  NOT  place  objects,  including  communication  equipment,  in  the 
area over the air bag or in the air bag deployment area. If the communication equipment is improperly 
installed and the air bag inflates, serious injury could occur. 
 
Some experimentation may be needed for optimal placement of the GPS receiver. If a GPS lock cannot be 
achieved in one location, try moving it to another location and see if better performance can be achieved. 
Metal roofs, metalized windows, and window solar shielding can all affect GPS satellite signal strength. If 
the front windshield is metalized, the manufacturer may have included a non-metalized spot specifically 
for radio equipment. Because of the Bluetooth link, you can also put the GPS receiver in the rear window 
if the front window is not satisfactory. The side windows can also be used. Maximum GPS signal strength 
is achieved when the GPS receiver is mounted with a clear view of the sky. 
 
Note: GPS performance is degraded in French cars due to windshield coating. It is recommended that you 
use the rear window of your car or look for a non-coated area. 
 
When  using  any  of  the  supplied  adhesives,  better  adhesion  can  be  achieved  if  the  mounting  surface  is 
first cleaned with an appropriate cleaner. A cleansing swab is supplied for this purpose. 
 
The  adhesives  included  to  attach  items  to  the  dash  are  very  strong  and  in  general  are  not  reusable. 
Please take care to get the items in the correct position the first time. Repositioning them once they have 
been stuck down is very difficult. 
 
Some  states  do  not  allow  any  obstruction  of  the  driver’s  view  by  objects  mounted  on  the  dash  or  the 
window. Please check local regulations before installing accessories in these positions. 
 
All communication equipment must be solidly attached to your vehicle. In case of accidents, anything not 
anchored to the vehicle can become a projectile and may cause injury. Always use the supplied mounting 
hardware. 
 
Do not mount any device within range of an inflated air bag. Contact your local vehicle dealer if you are 
unsure if an airbag can impact your device. 
 
Do  not  interfere  with  any  airbags.  Do  not  obstruct  any  views  of  the  driver.  Do  not  mount  the  GPS 
receiver over any heating or cooling vents. The GPS receiver should not be a distraction to the driver.  
 
Mounting the GPS Receiver 
The GPS Receiver can be mounted in several ways: 
 
Dash Mount 
The dash mount bracket allows the GPS receiver to be mounted to the dash so it does not slide around 
during  sudden  vehicle  maneuvers.  The  GPS  receiver  can  be  easily  snapped  into  and  out  of  the  dash 
mount  bracket  should  you  desire  to  remove  it  from  the  vehicle.  There  are  three  different  ways  of 
attaching it: 
 
Note:  Do  not  apply  any  of  the  adhesive  pads  directly  to  the  bottom  of  the  GPS  receiver.  Doing  so  will 
prevent  it  from  fitting  into  any  of  the  supplied  mounting  brackets.  Before  placing  the  adhesives,  please 
check that the GPS receiver can achieve a GPS lock in your preferred location. The adhesive pads are not 
reusable should you have to move the GPS receiver and it is difficult to remove.