Garmin g1000 mooney annunciationsandalerts pilots guide m20m m20r Manuale Utente
190-00444-01 Rev. A
Garmin G1000 Annunciations and Alerts Pilot’s Guide for Mooney M20M & M20R
9-16
ANNUNCIATIONS & ALERTS
GDC 74A Message Advisories
Alerts Window Message
Comments
GDC1 CONFIG – GDC1 configuration
error. Config service req’d.
error. Config service req’d.
GDC 74A configuration settings do not match those of the backup configuration
memory. The G1000 system should be serviced.
memory. The G1000 system should be serviced.
MANIFEST – GDC1 software mis-
match. Communication halted.
match. Communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be
serviced.
serviced.
BACKUP PATH – Airdata using backup
data path.
data path.
The GDC 74A is using a backup communication data path. The G1000 system
should be serviced when possible.
should be serviced when possible.
Miscellaneous Message Advisories
Alerts Window Message
Comments
FPL WPT LOCK – Flight plan waypoint
is locked.
is locked.
Upon power-up, the G1000 system detected that a stored flight plan waypoint
was locked. This occurs when an aviation database update eliminates an obsolete
waypoint. The flight plan cannot find the specified waypoint and flags this message.
This can also occur with flight plan user waypoints that are deleted.
Remove the waypoint from the flight plan if it no longer exists in any database,
OR
update the waypoint name/identifier to reflect the new information.
was locked. This occurs when an aviation database update eliminates an obsolete
waypoint. The flight plan cannot find the specified waypoint and flags this message.
This can also occur with flight plan user waypoints that are deleted.
Remove the waypoint from the flight plan if it no longer exists in any database,
OR
update the waypoint name/identifier to reflect the new information.
FPL WPT MOVE – Flight plan way-
point moved.
point moved.
The system has detected that a waypoint coordinate has changed due to a new
aviation database update. Verify that stored flight plans contain correct waypoint
locations.
aviation database update. Verify that stored flight plans contain correct waypoint
locations.
TIMER EXPIRD – Timer has expired.
The system notifies the pilot that the timer has expired.
DB CHANGE – Database changed.
Verify user modified procedures.
Verify user modified procedures.
This occurs when a stored flight plan contains procedures that have been manually
edited. This alert is issued only after an aviation database update. Verify that the
user-modified procedures in stored flight plans are correct and up to date.
edited. This alert is issued only after an aviation database update. Verify that the
user-modified procedures in stored flight plans are correct and up to date.
FPL TRUNC – Flight plan has been
truncated.
truncated.
This occurs when a newly installed aviation database eliminates an obsolete ap-
proach or arrival used by a stored flight plan. The obsolete procedure is removed
from the flight plan. Update flight plan with current arrival or approach.
proach or arrival used by a stored flight plan. The obsolete procedure is removed
from the flight plan. Update flight plan with current arrival or approach.
APPR VPROF – Approaching VNAV
profile.
profile.
Aircraft is approaching VNAV profile. Prepare to climb or descend to meet VNAV
profile.
profile.
APPR TRG ALT – Approaching target
altitude.
altitude.
Aircraft is approaching target altitude. Prepare to level aircraft.