Garmin gpsmap 3006c Manuale Utente

74

74

Lat/Lon Minutes Precision allows you to adjust the number of digits to the right of the decimal point 

for transmission of NMEA Output, either 2, 3 or 4 digits. The Waypoint ID setting lets you choose to 
output the waypoint identifi ers as names or numbers.

1.  Highlight ‘Advanced NMEA Setup’ button and press ENTER.

2.  To change enable/disable NMEA Output Sentences, highlight the desired sentence and press ENTER to 

check/uncheck. Only checked sentences will output.

Network Submenu Tab— display on/off selections for the devices currently connected to the MFD 
and Garmin Marine Network. The ‘Prepare Card For Software Update’ button is to be used for future 
software releases only. Check the Garmin web site for future updates and announcements.

Map Tab— contains setup options for the Map Page. See page 30.

Temp ( Temperature) Tab— displays the water temperature log (if equipped with a temperature 
transducer/sensor). The chart reads from right to left, so that the most recent temperature measured is 
displayed on the far right side of the chart. The dotted lines within the chart indicate intervals in the 
temperature scale and the duration of time. You must be receiving NMEA Sonar temperature data or using 
a Garmin Sonar Module for the Temperature Graph to display.

The following settings are available:
•   Temperature Scale – sets the temperature range (in degrees) for displaying the log. Select ‘Auto’ 

to have the unit automatically determine the best range, or select a span of 2, 4, 6, 8 or 10 degrees. 
Use the ‘Reset’ button in ‘Auto’ mode to reset the automatic range.

•   Time Duration – sets how fast or slow the temperature log scrolls; the shorter the time duration, 

the faster the temperature log scroll. Select a duration from 1 minute to 2.5 hours.

Highway Tab— contains setup options for the Highway Page. See page 35.

Main Menu—Temp Tab

Main Menu—System Tab 
(Network Submenu)