Garmin gpsmap 3006c Manuale Utente
76
Getting Started
Main Page Sequence
76
The GPSMAP 3006C/3010C uses an on-screen pop-up message system to alert you to unit operating
characteristics. Press the QUIT key to acknowledge and return to the page you were viewing.
Accuracy Alarm— The GPS accuracy has fallen outside of user-set value.
Alarm Clock— The alarm clock has sounded.
Anchor Drag Alarm— You have drifted out of the specifi ed distance range.
Approaching <Waypoint>— You are a specifi ed alarm distance from a destination waypoint.
Arrival At <Waypoint>— You have arrived at the destination waypoint.
Battery Alarm— Specifi ed amount of input voltage has been detected.
Can’t Read User Card— Error reading card. Remove and reinsert. Contact your dealer or Garmin Customer Service (pg. 86) if the problem persists.
Can’t Read Voltages That High, Limited To Top Of Range— Voltage range must be between 10.0 and 35.0 volts for the GPSMAP 3006C/3010C.
Can’t Read Voltages That Low, Limited To Bottom Of Range — Voltage range must be between 10.0 and 35.0 volts for the GPSMAP 3006C/3010C.
Alarm Clock— The alarm clock has sounded.
Anchor Drag Alarm— You have drifted out of the specifi ed distance range.
Approaching <Waypoint>— You are a specifi ed alarm distance from a destination waypoint.
Arrival At <Waypoint>— You have arrived at the destination waypoint.
Battery Alarm— Specifi ed amount of input voltage has been detected.
Can’t Read User Card— Error reading card. Remove and reinsert. Contact your dealer or Garmin Customer Service (pg. 86) if the problem persists.
Can’t Read Voltages That High, Limited To Top Of Range— Voltage range must be between 10.0 and 35.0 volts for the GPSMAP 3006C/3010C.
Can’t Read Voltages That Low, Limited To Bottom Of Range — Voltage range must be between 10.0 and 35.0 volts for the GPSMAP 3006C/3010C.
Can’t Unlock Maps— Data on data card is not unlocked for the unit. Contact your dealer or Garmin Customer Service (pg. 86).
Can’t Write User Card— Error reading card. Remove and reinsert. Contact your dealer or Garmin Customer Service (pg. 86) if the problem persists.
Database Error— Internal problem with the unit. Contact your dealer or Garmin Customer Service (pg. 86) to have the unit serviced.
Deep Water Alarm— Specifi ed deep water alarm depth has been detected below transducer.
Directory Item With This MMSI Already Exists— MMSI number already in DSC directory. Use a different number..
Directory Memory is Full Can’t Create Entry— DSC directory has reached maximum of 1000 contacts. Delete unneeded contacts to add new ones.
Distress Call— DSC distress call has been received. Take appropriate action.
Lost Remote GPS Connection— Problem with GPS antenna wiring. Check connections.
Lost Satellite Reception— The unit has lost satellite signals. Check antenna connections or try moving to a location with a clear view of the sky.
No Proximity Waypoints/Routes/Tracks/User Waypoints Found— Attempted to transfer user data from data empty data card. Make sure there is data to trans-
fer on data card.
Database Error— Internal problem with the unit. Contact your dealer or Garmin Customer Service (pg. 86) to have the unit serviced.
Deep Water Alarm— Specifi ed deep water alarm depth has been detected below transducer.
Directory Item With This MMSI Already Exists— MMSI number already in DSC directory. Use a different number..
Directory Memory is Full Can’t Create Entry— DSC directory has reached maximum of 1000 contacts. Delete unneeded contacts to add new ones.
Distress Call— DSC distress call has been received. Take appropriate action.
Lost Remote GPS Connection— Problem with GPS antenna wiring. Check connections.
Lost Satellite Reception— The unit has lost satellite signals. Check antenna connections or try moving to a location with a clear view of the sky.
No Proximity Waypoints/Routes/Tracks/User Waypoints Found— Attempted to transfer user data from data empty data card. Make sure there is data to trans-
fer on data card.
Appendix B
Messages