Garmin 5008 Manuale Utente

Digital Selective Calling

1.  From the Home screen, select 

 > 

.

2.  Select the vessel from the list, and then select 

.

3.  Select 

 to show or hide the trail for the vessel on the Navigation Chart.

1.  From the Home screen, select 

 > 

.

2.  Select any call from that vessel from the list, and then select 

 > 

.

3.  Select 

 to edit the symbol, or select 

 to edit the line color.

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you 

can use the chartplotter interface to set up an individual routine call. When setting up an individual 

routine call from your chartplotter, you can select one of the following channels on which you want 

to communicate. The radio transmits this request with your call.
The selection of a DSC channel is limited to those channels that are available in all frequency bands: 

6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77.

  NOtE: The default channel is 72. However, select 

 to select a different channel from the list. 

If you select a different channel, the chartplotter will use that channel for subsequent calls until you call 

using a different channel.

1.  While viewing a chart, select 

 > 

 > 

.

2.  Select the station to call from the list.
3.  Select 

 > 

.

4.  Select 

 to send the information about the call to the radio.

5.  On your Garmin VHF radio, select 

.

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you 

can use the chartplotter interface to set up an individual routine call to an Automatic Identification 

System (AIS) target. For more information on selecting a channel other than the default channel 

(Channel 72), see “

1.  While viewing a chart, select an AIS target  .
2.  Select 

 > 

.

3.  Select 

 to send the information about the call to the radio.

4.  On your Garmin VHF radio, select 

.