Garmin etrex camo Manuale Utente

39

 - allows simple ASCII text output of location and velocity information, without 

any input capabilities.

 - allows DGPS input using a standard RTCM SC-104 format without any output 

capabilities.

- allows DGPS input using a standard RTCM SC-104 format and supports 

the output of standard NMEA 0183 version 3.0 data. 

- allows DGPS input using a standard  RTCM SC-104 format and simple ASCII 

text output of location and velocity information.

 - Provides no interfacing capabilities.

If ‘GARMIN DGPS’ or ‘RTCM/NMEA’ format is selected, additional fields are provided to 

control a Garmin differential beacon receiver (e.g. GBR 21) directly from your eTrex. You can 
enter the beacon frequency and bit rate when you select ‘User’ from the Beacon pop-up list to 
manually tune the receiver (you can also ‘scan’ if you don’t know what the nearby station is, 
but the unit could continue scanning if reception is temporarily lost).

1.  Press the PAGE button to switch to the MENU Page. Press the UP and DOWN button and 

highlight the ‘SETUP’ field. Press ENTER. The SETUP Page appears. 

2.  Press the UP or DOWN button to select the ‘INTERFACE’ field. Press ENTER. The INTER-

FACE Page appears.

3.  Press ENTER on the ‘I/O FORMAT’ field. Press the UP or DOWN button to select the 

desired format. Press 

ENTER. Press PAGE to return to the page of your choice.