Garmin etrex camo Manuale Utente

40

System Page

The System Page shows you the unit’s current GPS Mode, Language, and Software Version. 

You can choose from four modes of GPS operation: Normal, WAAS, Battery Save, or Demo 

(Demonstration).

 - ‘NORMAL’  mode means the GPS is active and running whenever the 

unit is powered on. 

 - WAAS is designed to improve the overall accuracy and integrity of the 

GPS signal.  ‘WAAS’ mode utilizes more battery power than regular mode.  For more 
information, see “What is WAAS?” on Page 44.

 -  ‘BATTERY SAVE’ mode optimizes the GPS receiver’s power 

consumption.  In this mode, the GPS is updated less frequently, thus reducing the amount 
of power consumed.

 - The ‘DEMO’ mode is designed to demonstrate the features and functions 

of the eTrex inside a closed building where satellite reception is not possible. There is no 
navigation possible in ‘DEMO’ mode, but you can simulate many of the unit’s functions. 

  If you select the ‘DEMO’ mode, a window appears asking you to verify that you want to 

turn the GPS receiver off (this does not power off the unit). To do so, press ENTER.

1.  From the MENU Page, highlight ‘SETUP,’ then press ENTER. The SETUP Page appears. 
2.  Press the

 UP or DOWN button to highlight ‘SYSTEM.’ Press ENTER. The SYSTEM Page 

appears.

3.  Press the

 UP or DOWN button to highlight ‘GPS.’ Press ENTER. The Option List appears.

4.  Press the

 UP or DOWN button to highlight the desired mode and press ENTER.