Garmin stylus 3880 Manuale Utente

This section describes the general procedure on how to set up the network 
interface.

1. Check the network interface operation.

Check the functions and operations of the network interface, such as the 
status lights. See “Network Interface Operation” on page 9 for details.

2. Install the necessary network components on your computers.

Make sure that the necessary network components (such as TCP/IP) are 
installed on your computers, and network settings (such as the IP address, 
subnet mask, etc.) are set.

3. Connect the network interface to the network.

Connect the network interface to the network. See “Connecting the 
Network Interface to the Network” on page 16 for details.

4. Configure the network interface and install the printer driver.

5. If necessary, configure the network settings of the network interface using 

EpsonNet Config.

Configure the network interface using EpsonNet Config. For Windows 
users, see “About EpsonNet Config” on page 26. For Macintosh users, see 
“About EpsonNet Config” on page 27.