Roland VC-2 Manuale Utente
10
Panel Descriptions
Front Panel
INPUT
Adjusts the volume of the signal input through the MIC jacks
on the front panel.
on the front panel.
* This does not affect the rear panel INPUT jacks.
VOLUME
Adjusts the overall volume that is output from the MAIN
OUT jacks and PHONES jack.
OUT jacks and PHONES jack.
MIC Jack
This is a mic jack for analog audio signal input.
It accommodates either XLR type or phone type plugs.
XLR type connections can provide 48V phantom power,
allowing you to connect condenser mics that require phantom
power. In this case, turn the mic switch to “PHANTOM ON.”
allowing you to connect condenser mics that require phantom
power. In this case, turn the mic switch to “PHANTOM ON.”
* The audio signal received via the MIC jack is switched on/off by
the
* This instrument is equipped with balanced (XLR/TRS) type
jacks. Wiring diagrams for these jacks are shown below. Make
connections after first checking the wiring diagrams of other
equipment you intend to connect.
connections after first checking the wiring diagrams of other
equipment you intend to connect.
fig.XLR/TRSJack
MIC Switch
This setting specifies the impedance and phantom power
supply for the mic jack.
supply for the mic jack.
POWER
1
2
3
4
8
11
12
13
14
15
16
17
5
7
6
9 10
1
2
3
Hi-Z
Choose the high impedance (Hi-Z) setting
if you’ve connected a high-impedance de-
vice such as a guitar or bass to the phone-
type input jack.
if you’ve connected a high-impedance de-
vice such as a guitar or bass to the phone-
type input jack.
NORMAL
Choose the NORMAL setting if you’ve con-
nected a low impedance device such as a
mic to the phone-type input jack.
nected a low impedance device such as a
mic to the phone-type input jack.
PHANTOM
ON
ON
Choose this setting if you need to supply
phantom power to a mic connected to the
XLR-type input jack.
phantom power to a mic connected to the
XLR-type input jack.
4
vc2_for_XT_e1 10 ページ ２００５年３月８日 火曜日 午後４時５２分