Maretron gps200 Manuale Utente

Pagina di 23
 
GPS200 User’s Manual  
 
 
 
 
 
Page 8 
 
Revision 1.2
 
5  Troubleshooting 
If you notice unexpected operation of the Maretron GPS200, follow the troubleshooting 
procedures in this section to remedy simple problems. 
 
Symptom 
Troubleshooting Procedure 
No data output 
Check the connections to the NMEA 
2000
®
 connector and tighten if 
necessary 
 
Ensure that power is supplied to the 
connected NMEA 2000
®
 cable 
 
Ensure that the GPS200 has a clear 
view to the horizon in all directions 
 
Ensure that no VHF, satellite, or radar 
antennas have been mounted near the 
GPS200 
 
If these steps do not solve your problem, please contact Maretron Technical Support (refer to 
Section 7 for contact information). 
 
Warning: There are no user-serviceable components inside the Maretron GPS200.  Opening 
the GPS200 will expose the sensitive electronic components to adverse environmental 
conditions that may render the unit inoperative. Please do not open the GPS200, as this will 
automatically void the warranty. If service is required, please return the unit to an authorized 
Maretron service location.