Maretron gps100 Manuale Utente

 

 

The Maretron GPS100 provides a connection to an NMEA 2000

®

 interface through a 

connector that can be found on the bottom of the device (see Figure 3). 

 

 
The NMEA 2000

®

 connector is a five pin male connector (see Figure 4). You connect the 

GPS100 to an NMEA 2000

®

 network using a Maretron NMEA 2000

®

 cable (or compatible 

cable) by connecting the female end of the cable to the GPS100 (note the key on the male 
connector and keyway on the female connector). Be sure the cable is connected securely and 
that the collar on the cable connector is tightened firmly. Connect the other end of the cable 
(male) to the NMEA 2000

®

 network in the same manner. The GPS100 is designed such that 

you can plug or unplug it from an NMEA 2000

®

 network while the power to the network is 

connected or disconnected. Please follow recommended practices for installing NMEA 2000

®

 

network products. 

 

NMEA 2000

®

Connector