Nortel Networks 1140E Manuale Utente
Configuring options
20
c.
If the search is successful, a list of Bluetooth devices appears in
the Found: combo box.
the Found: combo box.
Note: If the search is not successful, the message "Search
completed. No device found" is displayed. If this happens, power off
the Bluetooth headset, and repeat steps 5 and 6.
completed. No device found" is displayed. If this happens, power off
the Bluetooth headset, and repeat steps 5 and 6.
7.
When your headset appears in the Found: combo box, press the
Stop
soft key or wait for the search to finish.
8.
Choose one of the following:
•
If your headset is displayed in the Found: combo box, proceed to
step 9.
step 9.
•
If your headset is not displayed in the Found: combo box, select your
headset from the list, as follows:
headset from the list, as follows:
a.
Press the
Right
navigation key to navigate to the Found: combo
box. Press the
Enter
key to start the edit mode.
b.
Press the
Down
navigation key to open the list. Press the
Up/
Down
navigation keys to scroll and highlight your headset.
c.
Press the
Enter
key to select the headset and close the list.
Press the
Enter
key to exit edit mode.
9.
Press the
Right
navigation key to scroll in the list and highlight the
Pair
button (next to the Pair Device item) and press the
Enter
key.
a.
A dialog box appears that prompts you to "Enter PIN#". Use the
telephone dialpad to enter the PIN for your Bluetooth headset;
check your headset's documentation to find its PIN (sometimes
called a passkey). Typically this value is 0000.
telephone dialpad to enter the PIN for your Bluetooth headset;
check your headset's documentation to find its PIN (sometimes
called a passkey). Typically this value is 0000.
b.
Enter the Bluetooth headset PIN and press the
Enter
key.
10. Choose one of the following:
•
If the headset is successfully paired with your phone, proceed to step
11. To verify that the pairing was successful, ensure that the headset
appears in the list next to the Paired: item. If pairing is successful, the
message "Pair completed" is also displayed at the bottom of the
screen.
11. To verify that the pairing was successful, ensure that the headset
appears in the list next to the Paired: item. If pairing is successful, the
message "Pair completed" is also displayed at the bottom of the
screen.
•
If the headset is not successfully paired with your phone, an error
message is displayed at the bottom of the screen. If you get an error
message:
message is displayed at the bottom of the screen. If you get an error
message: