Brother HL-5070N Manuale Utente
8
Setting Up Your Printer
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
Connecting the interface cable is
done when installing the driver.
1
Open the front cover by pressing the front
cover release button.
cover release button.
2
Unpack the drum unit assembly.
Remove the protective part.
Remove the protective part.
3
Rock it from side to side several times to
distribute the toner evenly inside the
assembly.
distribute the toner evenly inside the
assembly.
4
Put the drum unit assembly into the printer.
5
Close the front cover of the printer.
2
Install the Drum Unit Assembly
Front cover
Drum unit
assembly
assembly
Protective part
Step 1
Front cover
release button
release button