Zebra Technologies R110Xi Manuale Utente
116
R110Xi/R170Xi User Guide
23063L-003 Rev. 1 12/6/04
Routine Maintenance
Cleaning Schedule
Cleaning Schedule
. See the following pages for
specific procedures.
Clean Exterior
Clean the outside surfaces of the printer with a lint-free cloth. Use a mild detergent solution or
desktop cleaner sparingly, as needed.
desktop cleaner sparingly, as needed.
Caution • Use only the cleaning agents indicated. Zebra is not responsible for damage
caused by any other fluids being used on this printer.
caused by any other fluids being used on this printer.
Table 13 • Recommended Printer Cleaning Schedule
Area
Method
Interval
Printhead
Solvent*
Perform these procedures at the following times:
• When
• When
CLEAN HEAD NOW
appears.
• Direct Thermal Print Mode: After every roll of labels
or 500 ft (150 m) of fanfold labels.
• Thermal Transfer Print Mode: After every roll
(1500 ft or 450 m) of ribbon.
Platen roller
Solvent*
Transmissive (media) sensor
Air blow
Media path
Solvent*
Ribbon sensor
Air blow
Label-available sensors
Air blow
Monthly
Tear-off bar
Solvent*
Snap plate
Solvent*
As needed
* Use Preventative Maintenance kit, part number 47362, or a solution of 90% isopropyl alcohol and 10%
deionized water.
deionized water.
Caution • Do not use harsh or abrasive cleaning agents or solvents.