Konica Minolta 7013 psc Manuale Utente

TCP/IP Configuration-41

The AIX lp command works slightly differently than the lp command for other Sys-
tem V Release 4 systems. The following lp commands can be used to print files:

lp -d <queue_name> <filename> or

lp -d <queue_name>:<device_name> <file_name>

The Telnet utility uses the standard remote terminal protocol to configure the IP 
address, lpd/lpr printers, and other parameters on your system. Use the following 
guidelines to run Telnet. You have the same functionality with the HTML pages 
accessed by MAP or a Web Browser, as described in Chapter 3. 

• Most often, you make selections from menus by toggling between one choice or 

another, by selecting/deselecting or enabling/disabling an item.

• Press Enter, when not selecting an item. This will return you to a previous menu.

• If you do not make a menu selection for 2 minutes, you get a "Two Minute Warn-

ing" that within 2 more minutes your Telnet session will end. This ensures that one 
user does not leave a session idle for too long.

1. At the prompt, type: 

telnet  <network interface card IP address>

2. When login: appears, type guest if you are only interested in browsing the menus 

or sysadm if you want to change the configuration. Press Enter. When password: 

appears, again type guest or sysadm and press Enter.