Konica Minolta 7013 psc Manuale Utente
TCP/IP Configuration-45
7.6.6 Change Password
When you want to establish a new password, enter 5 from the Main menu. Type up to
eight characters after the New Password query and press Enter. Retype the same char-
acters at the Retype New Password query and press Enter. Use the Save Changes and
Exit option. Once you have established your password using Change Password, the
password sysadm will be rejected.
eight characters after the New Password query and press Enter. Retype the same char-
acters at the Retype New Password query and press Enter. Use the Save Changes and
Exit option. Once you have established your password using Change Password, the
password sysadm will be rejected.
Note:
There is a single maintenance access password to the Print Server Card. This pass-
word is used for both Telnet and HTML maintenance programs. This password may
be changed from Telnet or from HTML (accessed either via MAP or Web Browser
utility).
7.6.7 Exit
Telnet
Use the following procedures to exit Telnet:
1. To end your Telnet session, type E at the main menu. If you have made any
changes, the following menu will appear:
2. Choose your option and press Enter. For example, type 2 and press Enter. The
program will save your changes and reset the print server so that the changes will
take effect.
The Configuration Utility
Unit Serial no. 221963
Unit Serial no. 221963
Exit
1. Save Changes and Exit
2. Save Changes and Reset
3. Exit Without Saving Changes
2. Save Changes and Reset
3. Exit Without Saving Changes