Konica Minolta 7013 psc Manuale Utente
Hardware Installation-4
2.4
Connect the Network to Print Server Card: Token
Ring
Ring
You can connect your
Token Ring
network in one of two ways:
1.
Using the Token Ring Unshielded Twisted Pair/Type 3 (UTP) interface
. The
UTP network connection uses a 4-wire twisted pair RJ cable to plug into the RJ45
network connector (marked
network connector (marked
UTP
on the bracket). Once you make the connection,
continue to configure the Print Server Card and the network for the appropriate
protocols.
protocols.
Warning:
It is recommended that you DO NOT use the medial filters when making your
connection with the UTP cable. When you are wired for UTP, use a straight-
through twisted pair standard UTP cable connecting it directly to the UTP plug
on the Print Server Card.
Once you make the connection, continue to
2.5 Powering Up the Printer,