Brother Fax-885MC Manuale Utente

A U T O   D I A L   N U M B E R S   A N D   D I A L I N G   O P T I O N S      

Pick up the handset—OR—Press Speaker Phone. (See Storing Speed Dial 
Numbers, page 7-2.)

When you hear a dial tone, press Search/Speed Dial, press #, and then press the 
two-digit Speed Dial number.

To hang up a voice call, replace the handset. 

Sometimes you may want to choose from among several long distance carriers when 
you make a call. Rates may vary depending upon the time and destination. To take 
advantage of low rates, you can store the access codes or long-distance carriers as One 
Touch and Speed Dial numbers. You can store these long dialing sequences by 
dividing them and setting them up separately in any combination. You can even 
include manual dialing using the dial pad. The combined number will be dialed in the 
order you enter it, as soon as you press Fax Start. Make sure you select CHAIN as 
the type of the number when you store it as a One Touch or Speed Dial.  (See Storing 
One Touch Dial Numbers and Storing Speed Dial Numbers, page 7-1 to 7-2.)

If you are sending a fax, press Fax Start after entering the Speed Dial number. If you 
picked up the handset, press Fax Start when the receiving machine answers with fax 
tones.

For example: 

You store “555”on One Touch key 3 and “7000”on One Touch key 4. If you press One 
Touch 3, 4 and Fax Start you will dial “555-7000”. To temporarily change a number, 
you can substitute part of the number with manual dialing using the dial pad. For 
example, to change the number to 555-7001 you can press One Touch 3, and then 
press 7, 0, 0, 1 using the dial pad. 

Pause after dialing Speed Dial numbers for the name to be displayed before you enter 
the next portion of the dialing sequence.