Konica Minolta kn303ev2 Manuale Utente

2-12  Konica Network Interface Card INSTRUCTION MANUAL

Or Simple Context

standard.organization_1

For further details, check with the system administrator.

If you are using Novell NetWare 4.x Directory Services, type a preferred NDS tree in this field. If you do

not know the preferred NDS tree, type WHOAMI from the MS-DOS command line, then press [Enter]

for confirmation.

This option lets you select a queue scan rate for adjusting intervals at which the print server (network

interface card) poles the networks when searching for new print queue. You can type a number be-

tween 1 and 255 (seconds).

This option lets you select a frame type appropriate to networks in use. To select [Auto Sense] is to let

a proper frame type be automatically selected. To do this, you can either click on the radio button

corresponding to the frame type in use or click on [Auto Sense].

Bindery Services of Novell NetWare 4.x or greater are disabled when this box is checked and enabled

when this box is not checked. When Bindery is disabled, print servers connected to the Bindery file

server are not supported.

For each of the following items selected, click [Accept Settings] to continue the setup process, or click

on [Clear Inputs] to cancel the process.

Keep in mind that a valid password is required after you can enter data or change settings on the

screen. The default password is [sysadm]. To make new settings effective, be sure to reset the network

interface card.

Type an IP address of the print server if it is not in the IP address list on the screen. Check the address

with the system administrator. The default setting is set to 0.0.0.0, which means no IP address is set

up. This does not mean the IP address is set to 0s.

Type a subnet mask of the print server if it is not in the list on the screen.

Type a gateway IP address if necessary. Otherwise you can leave this blank.