Navigon 12xx Manuale Utente

User’s manual NAVIGON 12xx | 22xx 

- 50 - 

Navigation 

calculated for this obstruction, then the position of the message in the 
list is indicated. 

5 

Here the reported obstruction is displayed as a traffic sign. 

6 

Here the affected road is indicated. 

7 

Here you can see on which section of the road the obstruction lies. 

8 

The navigation system can Detour (

) or Ignore (

) congestion on 

the route. The button shows the active status. 

► 

Tap on the button to select the alternative setting. 

You can use the 

 (Up) and 

 (Down) buttons to scroll in the list of 

messages. 

► 

Tap on a message to display this information in detail. 

► 

Tap on 

 (Back) in order to close the T

 

window again. 

 

Note: Most radio stations report only traffic obstructions in their own 
state. You should therefore always tune into a station from the state in 
which you currently find yourself. (Refer to "Tuning Mode" on page 50) 

► 

In the Settings window, tap on T

. 

In the TMC

 window you can set the TMC traffic station and 

configure whether the reception of a traffic message concerning your 
route should affect your route planning and if so how. 

Tap on Tuning Mode and select a method for selecting the TMC radio 
station. 

► 

Automatic: You can use the arrow keys in the station area to select 
another station. The system will search for another station if 
reception becomes poor. 

► 

Hold station: You can use the arrow keys in the station area to 
select another station. The system will search for the same station 
on a different frequency if the signal becomes poor. 

► 

Hold frequency: You can use the arrow keys in the station area to 
select another frequency. The system will not search for another 
station if reception becomes poor. 

Tap on Recalculate Route and select how new traffic messages 
concerning your route are to be used.