bobcat t190 Manuale Utente
T190 Compact Track Loader
51
Operation & Maintenance Manual
Filling And Emptying The Bucket (ACS - Handles,
SJC - ‘H’ Pattern)
SJC - ‘H’ Pattern)
Filling
Figure 106
Figure 107
Lower the lift arms all the way (1) [Figure 106].
Tilt the bucket forward (2) [Figure 106] until the cutting
edge of the bucket is on the ground.
edge of the bucket is on the ground.
Drive slowly forward into the material. Tilt the bucket
backward (1) [Figure 107] all the way when the bucket is
full.
backward (1) [Figure 107] all the way when the bucket is
full.
Drive backward away from the material.
WARNING
Load, unload and turn on flat level ground. Do not
exceed Rated Operating Capacity shown on sign
(decal) in cab. Failure to obey warnings can cause
the machine to tip or roll over and cause injury or
death.
exceed Rated Operating Capacity shown on sign
(decal) in cab. Failure to obey warnings can cause
the machine to tip or roll over and cause injury or
death.
W-2056-0903
Emptying The Bucket
Figure 108
Keep the bucket low when moving to the area where you
want to empty the bucket.
want to empty the bucket.
Raise the lift arms (1) [Figure 108]. Level the bucket (2)
[Figure 108] while raising the lift arms to help prevent
material from falling off the back of the bucket.
[Figure 108] while raising the lift arms to help prevent
material from falling off the back of the bucket.
Drive forward slowly until the bucket is over the top of the
truck box or bin.
truck box or bin.
Empty the bucket (2) [Figure 108]. If all material is near
the side of the truck or bin, use the bucket tilt to move it to
the other side.
the side of the truck or bin, use the bucket tilt to move it to
the other side.
WARNING
Never dump over an obstruction, such as a post, that
can enter the operator cab. The machine could tip
forward and cause injury or death.
can enter the operator cab. The machine could tip
forward and cause injury or death.
W-2057-0694
B-15944
B-15781
1
2
B-15965
B-15781
1
B-15950
B-15781
1
2