Grizzly t23122 Manuale Utente

MODEL T23121/T23122

TRAILER JACK

1000 LB/1500 LB

INSTRUCTION SHEET

To reduce the risk of property damage,

serious personal injury, or death when using

this jack, take the following precautions:

•

Refer to your trailer owner's manual to

verify the Trailer Max Tongue Weight

does not exceed the maximum trailer

jack load rating.

• During installation, do not place any

part of your body under the trailer

tongue. Only support the trailer tongue

with jack stands rated for more than the

tongue weight of your trailer.

• Only use this trailer jack on a hard,

level surface capable of sustaining the

load.

• Always block trailer wheels when using

this trailer jack.

•

Do not modify this trailer jack.

• Never allow children to play with or near

the trailer jack while it is supporting the

trailer.

• Never work under a trailer that is

supported only by a trailer jack.

• Periodically inspect the jack fasteners,

frame, and welds for looseness, cracks,

or other damage. Do not use the jack if

there is a problem.

• Never tow a trailer with the jack in the

"Down" position, and be sure to lock

the jack in the "Up" position before

towing.

• Always make sure that the trailer hitch

receiver is fully connected and properly

locked to the ball hitch before retracting

this trailer jack.

Introduction

The Model T23121/T23122 Trailer Jack can be
mounted to the tongue of a trailer with a tongue
weight less than 1000 lbs (1500 lbs for the Model
T23122). The pivoting mounting plate allows the
jack assembly to swing out of the way and lock in
place to prevent high-centering when towing.

Specifications

Maximum Load (T23121) ......................1000 lbs.
Maximum Load (T23122) ......................1500 lbs.
Collapsed Height (Wheel to Pivot Center)

T23121 .................................................... 12"

T23122 .................................................12

⁄

Extended Height (Wheel to Pivot Center)

T23121 .................................................... 22"

T23122 .................................................22

⁄

Vertical Travel ................................................ 10"
Mounting Plate Size ............................5½" x 6¾"
Bolt Pattern .....................................See

Figure 2

Wheel Size ....................................................... 6"
Weight (T23121) ........................................14 lbs.
Weight (T23122) ........................................18 lbs.

WARNINg: NO PORTION OF THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE

OR FORM WITHOUT THE WRITTEN APPROvAL OF gRIzzLy INDUSTRIAL, INC.

#JB13553 PrinTED in CHina

Figure 1.

Model T23121.