Konica Minolta ip-432 Manuale Utente
3-8. Setting the Connection between the Computer and Printer
58
II Printer Chapter 3 Printing from Windows
Adding a printer driver
If you want to use a new printer driver that is not on the [Print using the following driver] list, this adds
that printer driver.
that printer driver.
1
Click the [Details] tab.
2
Click the [New Driver...] button.
→ The confirmation screen is displayed.
→ The confirmation screen is displayed.
3
Click the [Yes] button.
→ The [Select device] screen is displayed.
For the rest of the procedure, [Please ask your administrator].
→ The [Select device] screen is displayed.
For the rest of the procedure, [Please ask your administrator].
Timeout settings
This sets the wait time until the printer is in a usable state.
The choices that can be set are as follows.
The choices that can be set are as follows.
Not selected
This sets the wait time until the printer can print when print data is transmitted from the computer,
When the set time is exceeded, an error message is displayed and the print job is automatically
canceled.
This sets the wait time until the printer can print when print data is transmitted from the computer,
When the set time is exceeded, an error message is displayed and the print job is automatically
canceled.
Transmission retry
This sets the wait time until the printer can retry printing when data transmission from the com-
puter fails.
When the set time is exceeded, an error message is displayed and the print job is automatically
canceled.
This sets the wait time until the printer can retry printing when data transmission from the com-
puter fails.
When the set time is exceeded, an error message is displayed and the print job is automatically
canceled.
Port settings
This can be set when [LPT*] is set as the printed connection destination. This makes settings for the
LPT port to which the printer is connected.
The choices that can be set are as follows.
LPT port to which the printer is connected.
The choices that can be set are as follows.
Spool MS-DOS print jobs
Spooling print jobs from MS-DOS-based applications
Spooling print jobs from MS-DOS-based applications
Check port state before printing
This checks whether the port is connected before printing.
This checks whether the port is connected before printing.
Capture Printer port
This assigns a network printer to a virtual printer port.
The choices that can be set are as follows.
The choices that can be set are as follows.
Device
Select the port to which the network printer is connected.
Select the port to which the network printer is connected.