Konica Minolta ip-432 Manuale Utente
3-8. Setting the Connection between the Computer and Printer
60
II Printer Chapter 3 Printing from Windows
Windows NT 4.0
Checking the printer driver version
This checks the version of the printer driver currently being used.
With the PCL driver [Document Defaults…], select the [About] tab.
The driver name and version can be checked.
With the PCL driver [Document Defaults…], select the [About] tab.
The driver name and version can be checked.
Adding a printer driver
If you want to use a new printer driver that is not on the [Print using the following driver] list, this adds
that printer driver.
that printer driver.
1
In PCL driver properties, click the [General] tab.
2
Click the [New Driver] button.
→ The confirmation screen is displayed.
→ The confirmation screen is displayed.
3
Click the [Yes] button.
→ The Select device screen is displayed.
For the rest of the procedure, [Please ask your administrator].
→ The Select device screen is displayed.
For the rest of the procedure, [Please ask your administrator].
Timeout time setting
This sets the wait time until the printer can retry printing when data transmission from the computer fails.
When the set time is exceeded, an error message is displayed and the print job is automatically canceled.
When the set time is exceeded, an error message is displayed and the print job is automatically canceled.
1
From the PCL driver [Properties], select the [Ports] tab.
2
Select the port to use, then click the [Configure Port] button.
→ The [LPT port configuration] screen is displayed.
→ The [LPT port configuration] screen is displayed.
3
This inputs the wait time until the computer re-sends print data.
4
Click the [OK] button.
Printer port assignment
This assigns a network printer to a virtual printer port.
1
From the PCL driver Properties, select the [Ports] tab.
2
Check the checkbox for the port to which the network printer is connected.
3
Click the [OK] button.