Pentax AF 540 FGZ II Guida Al Funzionamento
47
2
(Preparation of the Flash Unit Attached to the Camera)
1
Set wireless mode and a channel of this flash unit attached
to the camera.
1 Turn the camera off and then attach this flash unit to the
1 Turn the camera off and then attach this flash unit to the
hot shoe of the camera.
2 Turn on the power switch (ON).
3 Press the flash mode button (MODE) a number of times
to display P-TTL
MASTER on the LCD panel.
4 Press the setting button (SET) and rotate the
adjustment dial to display CONTROL or MASTER.
CONTROL: For using the flash unit attached to the camera
as the control flash.
MASTER: For using both flash units as main flashes.
5 Press the setting button (SET) to complete the setting.
6 Set a channel (CH1 through CH4) from the function
menu.
for details on the function menu.
7 Press and hold the function button (
) to complete
the setting.
(Preparation of the Separated Flash Unit)
2
Set the channel of the separated (wireless) flash unit to the
same channel as the flash unit attached to the camera.
1 Place the other flash unit in the desired position.
2 Turn on the power switch (ON).
3 Press the flash mode button (MODE) a number of times
to display P-TTL
MASTER on the LCD panel.
4 Press the setting button (SET) and rotate the
adjustment dial to display SLAVE.
Wireless High-speed Sync Photography
AF360FZ_540FGZ.book Page 47 Friday, December 20, 2013 6:11 PM