Pentax AF 540 FGZ II Guida Al Funzionamento

50

2

n

Slave Mode Setting

To properly control the slave flash, it is necessary to set slave 

mode settings from the function menu.

1

Turn on the power switch (ON).

2

Press and hold the function button (

).

3

Rotate the adjustment dial to display SL on the LCD panel.

4

Press the setting button (SET) to blink SL1 or SL2.

• The flash will not discharge properly if slave mode was 

set to the wrong mode. It may not discharge at all or may 

discharge simultaneously with the control flash.

5

Rotate the adjustment dial to select SL1 or SL2. 

6

Press the setting button (SET) to complete the setting.

• To exit the function menu, press and hold the function 

button (

).

• In SL2 fluorescent lamps flicker may contribute to flash 

unit’s erroneous firing on rare occasions.

SL1: When photographing in wireless mode.
SL2: When photographing with slave flash 

(not using wireless function).

Slave mode

AF360FZ_540FGZ.book  Page 50  Friday, December 20, 2013  6:11 PM