Pentax AF 360 FGZ II Guida Al Funzionamento

This flash unit has the following flash modes. Select the mode

best suited for the subject.

P-TTL Auto Flash (P-TTL)

A pre-flash is discharged before the main flash so that the

multi-segment metering sensor can measure the subject’s

distance, brightness, brightness difference, backlit condition,

etc. The data obtained is incorporated to set the output of the

main flash. This mode obtains more accurate results than with

the conventional TTL mode. Refer to page 25 for instructions

on how to use this flash mode.

Manual Flash (M)

When the camera is set to manual exposure, manual flash can

be set to suit the subject distance and aperture. The manual

flash output can be set to 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64,

1/128 or 1/256. Refer to page 26 for instructions on how to use

this flash mode.

Multi Flash (Multi)

A series of flashes can be discharged in a specified interval.

The flash output, number of flashes, and flash frequency can be

set respectively. Refer to page 27 for instructions on how to use

this flash mode.

Wireless Mode (P-TTL/Manual)

In wireless mode (P-TTL), you can take photographs with this

flash unit separated from the camera. If the camera is not

compatible with the wireless function, you can also take

photographs wirelessly in slave flash mode. (Refer to page 48.)

Refer to pages 28 and 40 for instructions on how to use

wireless mode.

2. Taking Pictures

Using the Flash Modes

AF360FZ_540FGZ.book Page 24 Friday, December 20, 2013 6:11 PM