Panasonic SC-PM5 Guida Al Funzionamento
RQTX0182
8
Using the FM/AM radio
Manual tuning
Manual tuning
1
Press [FM/AM] to select “FM” or “AM”.
2
Press [TUNE MODE] to select “MANUAL”.
3
Press [
4/1] or [¡/¢] to select the frequency of the
required station.
T
o tune automatically
Press [
4/1] or [¡/¢] for a moment until the frequency starts
changing rapidly. The unit begins auto tuning, stopping when it fi nds
a station.
• Auto tuning may not function when there is excessive interference.
• To cancel auto tuning, press [
a station.
• Auto tuning may not function when there is excessive interference.
• To cancel auto tuning, press [
4/1] or [¡/¢] once again.
To improve FM sound quality
To improve FM sound quality
Press [FM MODE] to display “MONO”.
To cancel
Press [FM MODE] again until “MONO” disappears.
Press [FM MODE] again until “MONO” disappears.
• MONO is also cancelled if the frequency is changed.
• Turn off “MONO” for normal listening.
• Turn off “MONO” for normal listening.
For Continental Europe
RDS broadcasting
RDS broadcasting
This unit can display the text data transmitted by the radio data
system (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS”
will light up on the display.
system (RDS) available in some areas.
If the station you are listening to is transmitting RDS signals, “RDS”
will light up on the display.
Press [DISPLAY] to display:
Station name (PS) Program Type (PTY)
Frequency display
Program type displays
NEWS
VARIED
FINANCE
COUNTRY
AFFAIRS
POP M
CHILDREN
NATIONAL
INFO
ROCK M
SOCIAL A
OLDIES
SPORT
M-O-R-M
RELIGION
FOLK M
EDUCATE
LIGHT M
PHONE IN
DOCUMENT
DRAMA
CLASSICS
TRAVEL
TEST
CULTURE
OTHER M
LEISURE
ALARM
SCIENCE
WEATHER
JAZZ
M-O-R-M = Middle-of-the-Road music
Note:
RDS displays may not be available if reception is poor.
RDS displays may not be available if reception is poor.
Memory preset
Memory preset
30 FM and 15 AM stations can be preset.
Preparation
Press [FM/AM] to select “FM” or “AM”.
Press [FM/AM] to select “FM” or “AM”.
Automatic presetting
Automatic presetting
1
Press [PLAY MODE] repeatedly to select either “CURRENT”
or “LOWEST”.
CURRENT
Tuning begins from the current frequency.
LOWEST
Tuning begins from the lowest frequency.
2
Press [AUTO PRESET] to start presetting.
The tuner presets all the stations it can receive into the channels in
ascending order. When fi nished, the last station memorised is tuned
in.
ascending order. When fi nished, the last station memorised is tuned
in.
Manual presetting
Manual presetting
1
Press [TUNE MODE] to select “MANUAL”.
2
Press [
4/1] or [¡/¢] to tune to the required station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
The station occupying a channel is erased if another station is
preset in that channel.
The station occupying a channel is erased if another station is
preset in that channel.
5
Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Selecting a preset station
Press the numeric buttons to select the channel.
For channels 10 to 30 press [
For channels 10 to 30 press [
h10], then the two digits.
OR
1
Press [TUNE MODE] to select “PRESET”.
2
Press [
4/1] or [¡/¢] to select the channel.
For Southeast Asia, Australia and N.Z.
AM allocation setting
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
10 kHz steps.
To change the step from 9 kHz to 10 kHz
.
1
Press and hold [FM/AM].
After a few seconds the display changes to a fl ashing display of
the current minimum frequency.
After a few seconds the display changes to a fl ashing display of
the current minimum frequency.
2
Continue to hold down [FM/AM].
• When the minimum frequency changes, release the button.
• When the minimum frequency changes, release the button.
To return to the original step, repeat the above steps.
• After the setting is changed, any previously preset frequency
will be cleared.
RQTX0182-B_En.indd 8
RQTX0182-B_En.indd 8
3/4/09 3:45:09 PM
3/4/09 3:45:09 PM