Panasonic DMREX88 Guida Al Funzionamento
29
RQT9078
Recording from an External Device
Ad
v
anced Features
Start play on the external device.
REC
at the point you want to
start recording to the disc.
Notes
When timer recording starts while recording from an external
device, timer recording takes priority and recording from the
external device stops.
external device stops.
If video is copied from another piece of equipment to this unit,
then the video quality will be degraded.
Preparation:
Press [DRIVE SELECT] to select the HDD or DVD
drive.
Press [REC MODE] to select the recording mode
(
25).
To reduce noise in input from a video cassette
recorder, set “Input NR” to “On” in the on-screen
display (
display (
67).
SELECT
INPUT
to select the input where
your external device is connected.
–
Front panel inputs are AV3.
Recording from a VCR, etc.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Turn on the DV equipment and
pause play at the point you want
to start recording.
to start recording.
DV Auto Rec
Rec to HDD
Rec to DVD
Cancel
DV unit is connected.
Record from the DV unit?
Record from the DV unit?
OK
RETURN
SELECT
“DV Auto Rec”
screen may appear.
screen may appear.
Recording from a DV Camcorder
Preparation:
1 Turn off the main unit and DV equipment, then
connect the equipment with the unit’s DV input
terminal (
terminal (
left).
2 Turn on the main unit.
When “DV Auto Rec” screen does not appear
Perform steps
(
above).
1. Press [DRIVE SELECT] to select the HDD or DVD drive.
2. Press [FUNCTION MENU].
3. Press [
2. Press [FUNCTION MENU].
3. Press [
, ] to select “To Others”, then press [OK].
4. Press [
, ] to select “DV Auto Rec”, then press [OK].
You can proceed to step
(
30).
(Continued on the next page)
You can get a sharper, clearer picture by connecting with an S Video
cable instead of the yellow video cable.
If the audio output of the external device is monaural, connect to
L/MONO on the AV3 input terminals at the front.
OPEN / CLOSE
REC
L/MONO - AUDIO- R
VIDEO
S VIDEO
DV IN
AV3 IN
This unit
Yellow White Red
S Video
cable
Audio/
video cable
video cable
Other video equipment
Connect to Audio/Video output terminals.
4-pin
DV cable
DV cable
Preparation:
When the output signal from the external device is
NTSC, change the “TV System” to “NTSC” in the
Setup menu (
Setup menu (
75).
This unit cannot record NTSC signals to discs that
already have PAL signal recordings. (However, both
types of programmes can be recorded onto the
already have PAL signal recordings. (However, both
types of programmes can be recorded onto the
HDD.)
Notes
Almost all videos and DVD-Video on sale have been treated to
prevent illegal copying. Any software that has been so treated
cannot be recorded using this unit.
cannot be recorded using this unit.
Tips
To skip unwanted parts
Press [
Press [
] to pause recording. (Press again to restart recording.)
To stop recording
Press [
Press [
STOP].
The confi rmation screen appears. Press [OK].
Using Flexible Recording ( 27), you can record the content of a
video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.
possible quality of recording without wasting disc space.
[HDD] [RAM] Programmes are recorded as a single item; breaks in the
images create chapters and playlists are created automatically.
images create chapters and playlists are created automatically.
DMR-EX78_88EB.indb 29
DMR-EX78_88EB.indb 29
2008/02/14 12:17:53
2008/02/14 12:17:53