Panasonic KXTGA405 Guida Al Funzionamento

3

For assistance, please visit http://www.panasonic.com/help

Once the unit is connected to a power outlet in step 3, it automatically goes into 
registration mode (if not already registered).

Range extender: Connect the AC adaptor.
L

Use only the supplied Panasonic AC adaptor PQLV219.

Base unit: Press and hold {LOCATOR} for about 5 seconds.
L

Depending on the base unit, a registration tone sounds.

L

If all registered handsets start ringing, press the same button to stop. Then 
repeat this step.

L

The next step must be completed within 90 seconds.

L

When the unit is turned on, the STATUS indicator and w indicator light amber 
for about 2 seconds.

Range extender: Confirm that the STATUS indicator and w indicator light 
green. (The unit is ready for use.)
L

If the indicators do not light green, re-position the unit in a place where the 
indicators light green.

Base unit: To exit registration mode, press {LOCATOR}.

Note:
L

The AC adaptor must remain connected at all times. (It is normal for the adaptor to 
feel warm during use.)

L

The AC adaptor should be connected to a vertically oriented or floor-mounted AC 
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight 
of the adaptor may cause it to become disconnected.

L

The unit can support a maximum of 2 handsets at a time.

L

Up to 2 range extenders can be registered to the base unit.

Press plug firmly.

Hook

(120 V AC, 60 Hz)

TGA405(option)_(e-e).fm  Page 3  Wednesday, March 5, 2014  4:56 PM