Panasonic S-ICX Manuale
Built-In ACD Supervisor Guide
Section 521
10
S-ICX (International) issued February 2000
S-ICX-10-521 (ACD 3.0)
Example:
4. Set parameter 3, and press the HOLD key.
Example: Enter three digits to set the No Ans Timer.
The program line that was set is updated when the final parameter
is set. The next line is moved to, and the screen in step 1 is
redisplayed.
is set. The next line is moved to, and the screen in step 1 is
redisplayed.
5. Repeat steps 1 to 4 to set other program lines, and end
programming at the END/DISC line.
Note:
• The program line is updated when the final parameter setup is completed at
each command, and the next line is moved to. (Example: In the case of the
FWD command, the program line is updated when the no answer timer of
parameter 2 is input, and the next line is moved to.)
FWD command, the program line is updated when the no answer timer of
parameter 2 is input, and the next line is moved to.)
• If you press soft key 10 and select List at any of the above steps, the List
Mode screen is redisplayed.
• The END/DISC line cannot be changed nor deleted.
INSERT (FF2)
This command inserts a new line in the current setting of displayed program
lines. Insertion can be repeated up to 19 lines.
lines. Insertion can be repeated up to 19 lines.
The following screen display shows an example of insertion and setting of the
SEARCH command.
SEARCH command.
1. Press
the
soft keys 1, 2, 3, 6 or 7 for the commands to be set, and
press the HOLD key.
Example: Press soft key 3 to select SEARCH.
Example: Press soft key 3 to select SEARCH.
SEARCH 2,015,010
03:No Ans Timer
Enter The AGENT
NO Ans Time.
1 to 600 sec.
List
→
01:Select Cmd.
FWD
FWDVM
PLAY
RET
SEARCH
List
→