Panasonic S-ICX Manuale

Section 521

Built-In ACD Supervisor Guide

S-ICX-10-521 (ACD 3.0)

S-ICX (International) issued February 2000

11

2.  Set parameter 1, and press the HOLD key.

Example: Press key 1 to set group 1.

Example:

3.  Set parameter 2, and press the HOLD key.

Example: Press the 0, 1 and 0 keys to set the Search Timer to 10 
seconds.

Example:

4.  Set parameter 3, and press the HOLD key.

Example: Enter three digits to set the No Ans Timer.

The program line that was set is updated when the final parameter 
is set. The next line is moved to, and the screen in step 1 is 
redisplayed.

5.  Repeat steps 1 to 4 to set insertion of other program lines, and end 

programming at the END/DISC line.

• If you press soft key 10 and select List at any of the above steps, the List 

Mode screen is redisplayed.

• The END/DISC line cannot be changed nor deleted.

This command deletes the current setting of displayed program lines. 
Deletion can be repeated up to 19 lines.

The following screen display shows an example of deletion of line 01.

→

→

→