Cisco CATALYST 2950-24 XL 24 PORT RJ45 RACK MOUNT 10/100 SWITCH STANDARD SOFTWARE Guida Specifiche

Pagina di 26
1-19
Catalyst 2950 Switch Hardware Installation Guide
OL-6156-01
Chapter 1      Overview
Front-Panel Description
For more information about GBIC LEDs, see your GBIC module documentation.
 show the bandwidth utilization percentages displayed by the right-most
LEDs.
Note
The Catalyst 2950 LRE switch LEDs do not give utilization status.
If all LEDs on a Catalyst 2950-12, 2950-24, 2950C-24, 2950SX-24, or 2950T-24 switch are green (no
amber showing), the switch is using 50 percent or more of the total bandwidth. If the far-right LED is
off, the switch is using more than 25 but less than 50 percent of the total bandwidth, and so on. If only
the far-left LED is green, the switch is using less than 0.0488 percent of the total bandwidth. (See
Figure 1-20 Bandwidth Utilization on Catalyst 2950-12 Switches
SPEED
10/100/1000 ports
1 2
Off
Port is operating at 10 Mbps.
Green
Port is operating at 100 Mbps.
Flashing green Port is operating at 1000 Mbps.
SFP modules
Off
Port is operating at 10 Mbps
Green
Port is operating at 100 Mbps
Flashing green Port is operating at 1000 Mbps
1.
On an LRE switch, the LEDs for Uplink Port 1 and Uplink Port 2 correspond either to the SFP module port or to the
10/100/1000 port, depending on which is active.
2.
If an LRE switch senses connections to both ports, by default, the switch chooses the fiber-optic connection over the copper
connection.
Table 1-7
Meaning of Port LED Colors in Different Modes for the LRE Switches (continued)
Port Mode
Color
Meaning
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
Catalyst 2950
 SERIES
10Base-T / 100Base-TX
47267
6.25–12.4%+
12.5–24%+
0–0.0487%+
25–49%+
50%+