Cisco CATALYST 6509 BUNDLE WITH 1300W AC POWER SUPPLY WITH FAN TRAY Guida Specifiche
1-43
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6509-NEB-A Switch
Catalyst 6509-NEB-A Switch
lists the features of the Catalyst 6509-NEB-A switch chassis.
lists the
specifications of the Catalyst 6509-NEB-A switch chassis.
shows the Catalyst 6509-NEB-A
switch chassis.
Table 1-17 Catalyst 6509-NEB-A Switch Features
Feature
Description
Chassis
•
Nine vertical slots. Slots are numbered from 1 (right) to 9 (left).
Supervisor Engines
•
Supports Supervisor Engine 1, Supervisor Engine 2, Supervisor
Engine 32, and Supervisor Engine 720.
Engine 32, and Supervisor Engine 720.
–
Supervisor Engine 1 and Supervisor Engine 2 are installed in slot 1
and slot 2.
and slot 2.
–
Supervisor Engine 32 and Supervisor Engine 720 are installed in
slot 5 and slot 6.
slot 5 and slot 6.
–
Supervisor Engine 720 has built-in switching fabric. Switch Fabric
Modules are not supported by Supervisor Engine 720 and cannot be
installed in the same chassis.
Modules are not supported by Supervisor Engine 720 and cannot be
installed in the same chassis.
•
The uplink ports are fully functional on all redundant supervisor engine
models when they are in standby mode.
models when they are in standby mode.
Note
Redundant supervisor engines must be configured identically.
Modules
•
Supports up to eight Catalyst 6500 series modules.
•
WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be
installed in slot 5 or slot 6.
installed in slot 5 or slot 6.
•
Some Catalyst 6500 series modules may:
–
Not be supported
–
Require that you install a Supervisor Engine 720
–
Have chassis slot restrictions
–
Require a specific software release level
Check your software release notes for specific information.
Backplane Bandwidth
•
32 GBps shared bus.
•
256 GBps switch fabric.
•
720 GBps switch fabric.
Clock and VTT Modules
•
Two replaceable clock modules (CLK-7600=) provide clocking signals
to the EOBC channel and the switching bus.
to the EOBC channel and the switching bus.
•
Three replaceable voltage termination (VTT) modules
(WS-C6K-VTT=) provide reference voltage for bus signals.
(WS-C6K-VTT=) provide reference voltage for bus signals.