JVC KW-V340BT Manuale Proprietario
Settings
Settings
Remote Controller
Remote Controller
<System Information>
Update the system by connecting a USB device
containing an update file.
• To obtain the update file, visit
containing an update file.
• To obtain the update file, visit
<http://www.jvc.net/cs/car/>.
Connect a USB device with the update file to the unit.
System Information
<Application Version>
Updates the system application.
Updates the system application.
<System Version>
Updates the system.
Updates the system.
<DVD Version>
Updates the DVD system application.
Updates the DVD system application.
The system update starts. It may take a while.
If the update has been completed successfully,
“Update Completed” appears, then reset the unit.
If the update has been completed successfully,
“Update Completed” appears, then reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and then
• If the update has failed, turn the power off and then
on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from the
beginning.
is turned on. The update will be performed from the
beginning.
<Open Source Licenses>
Shows the Open Source Licenses.
Remote controller RM-RK258 is supplied for
KW-V240BT Region 4.
• For KW-V140BT/KW-V240BT Region 1/KW-V340BT:
KW-V240BT Region 4.
• For KW-V140BT/KW-V240BT Region 1/KW-V340BT:
To use the remote controller, purchase optional
remote controller, RM-RK258.
remote controller, RM-RK258.
Refer to the instruction manual supplied with the
remote controller.
• For KW-V240BT Region 4: The unit is equipped
with a steering wheel remote control function.
(Page 48)
(Page 48)
– See page 54 for connection.
– Operations may differ depending on the type of
steering wheel remote control.
* DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
Remote sensor*
RM-RK258
Preparation
Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
to activate the battery.
Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
– If the effectiveness of the remote controller
decreases, replace the battery.
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material — special
handling may apply. See <www.dtsc.ca.gov/
hazardouswaste/perchlorate>.
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material — special
handling may apply. See <www.dtsc.ca.gov/
hazardouswaste/perchlorate>.
49
ENGLISH
EN_KW-V2018ST_KR.indb 49
2017/05/25 9:05