JVC KW-V340BT Manuale Proprietario

•  DO NOT connect the ignition wire (red) and the 

battery wire (yellow) to the car chassis (ground), you 
may cause a short circuit, that in turn may start a fire.

•  DO NOT cut out the fuse from the ignition wire (red) 

and the battery wire (yellow). The power supply must 
be connected to the wires via the fuse.

•  Always connect the ignition wire (red) and the 

battery wire (yellow) to the power source running 
through the fuse box.

•  Install this unit in the console of your car.
•  Do not touch the metal parts of this unit during and 

shortly after the use of the unit. Metal parts such as 
the heat sink and enclosure become hot.

•  When parking at a low ceiling area, turn off the unit 

to store the antenna. As when the unit is installed in 
the car with the function of auto antenna; the radio 
antenna extends automatically when you turn on 
the unit with the antenna control wire (ANT. CONT) 
connected. (Page 54)

•  Mounting and wiring this product requires skills and 

experience. For best safety, leave the mounting and 
wiring work to professionals.

•  Mount the unit so that the mounting angle is 30° or 

less.

•  Make sure to ground the unit to a negative 12 V DC 

power supply.

•  Do not install the unit in a location exposed to direct 

sunlight or excessive heat or humidity. Also avoid 
places with too much dust or the possibility of water 
splashing.

•  Do not use your own screws. Use only the screws 

provided. If you use the wrong screws, you could 
damage the unit.

•  After the unit is installed, check whether the brake 

lamps, blinkers, wipers, etc. on the car are working 
properly.

•  Do not press hard on the panel surface when 

installing the unit to the car. Otherwise scratches, 
damage, or failure may result.

•  If the power is not turned on (“Miswiring DC Offset 

Error”, “Warning DC Offset Error” is displayed), 
the speaker wire may have a short circuit or have 
touched the chassis of the car and the protection 
function may have been activated. In this case, the 
speaker wire should be checked.

•  Keep all cables away from heat dissipating metal 

parts.

JVC Remote is an application that connects and 
controls compatible JVC car receivers via Bluetooth® 
like a wireless remote control.

You can also operate this unit from a Smartphone 
using JVC Remote APP.
This application can display the source information 
of this unit on the smartphone’s screen, and enables 
the user to make an audio setting using the graphic 
user interface of this application.
This application also works as a free standalone 
music player application, when your Smartphone is 
not connected to this unit.
•  For details, visit 

<www.jvc.net/car/app/jvc_remote/>.

51

ENGLISH

EN_KW-V2018ST_KR.indb   51

2017/05/25   9:05