Garmin Striker 4 Manuale Proprietario

Beeper: Turns on and off the tone that sounds for alarms and 

Auto Power: Turns on the device automatically when power is 

applied.

System Information: Provides information about the device and 

the software version.

Select Settings > Settings > System Information.
Event Log: Allows you to view a log of system events.
Software Information: Provides information about the device 

and the software version.

Garmin Devices: Provides information about connected Garmin 

devices.

Factory Settings: Restores the device to factory settings.

NOTE: This deletes any setting information you have 

entered.

Select Waypoint Map > 

.

Waypoints: Shows the list of waypoints.
Waypoint Display: Sets how to display waypoints on the chart.
Routes: Shows the list of routes.
Track: Shows the track option menu.
Search: Allows you to search for saved routes and waypoints.
Map Setup: Sets the perspective of the waypoint map and 

shows the heading line, which is a line drawn on the waypoint 

map from the bow of the boat in the direction of travel.

Overlay Numbers: Allows you to customize the data shown on 

the waypoint map.

Select Settings > Alarms > Sonar.
Shallow Water: Sounds when the water depth is shallower than 

the specified depth.

Deep Water: Sounds when the water depth is deeper than the 

specified depth.

Water Temp.: Sounds when the water temperature varies more 

than ± 2°F (± 1.1°C). Alarm settings are saved when the 

device is turned off.
NOTE: You must connect the device to a temperature-

capable transducer to use this alarm.

Fish: Sets an alarm to sound when the device detects a 

suspended target.
•

 sets the alarm to sound when fish of all sizes are 

detected.

•

 sets the alarm to sound only when medium or large 

fish are detected.

•

 sets the alarm to sound only when large fish are 

detected.

Alarm Clock: Sets an alarm clock.
Device Voltage: Sets an alarm to sound when the battery 

reaches a specified low voltage.

GPS Accuracy: Sets an alarm to sound when the GPS location 

accuracy falls outside the user-defined value.

Select Settings > Alarms > Navigation.
Arrival: Sets an alarm to sound when you are within a specified 

distance or time from a turn or a destination.

Anchor Drag: Sets an alarm to sound when you exceed a 

specified drift distance while anchored.

Off Course: Sets an alarm to sound when you are off course by 

a specified distance.

NOTE: Some settings and options require additional hardware.
Select Settings > Navigation.
Route Labels: Sets the type of labels shown with route turns on 

the map.

Turn Transition Activ.: Sets the turn transition to be calculated 

based on time or distance.

Turn Transition Time: Sets how many minutes before the turn 

that you transition to it as the next leg, when Time is selected 

for the Turn Transition Activ. setting.

Turn Transition Dist.: Sets how far before the turn that you 

transition to it as the next leg, when Distance is selected for 

the Turn Transition Activ. setting.

Route Start: Selects a starting point for route navigation. You 

can select Boat to start navigation from the current vessel 

location, or Waypoints to start from the first waypoint on the 

route.

NOTE: Some settings and options require additional hardware.
Select Settings > My Vessel.
Transducer Type: Displays the type of transducer connected to 

Keel Offset: Offsets the surface reading for the depth of a keel, 

making it possible to measure depth from the bottom of the 

Temp. Offset: Compensates for the water temperature reading 

from a temperature-capable transducer (

).

Select Settings > Units.
System Units: Sets the unit format for the device.
Variance: Sets the magnetic declination, the angle between 

magnetic north and true north, for your present location.

North Reference: Sets the direction references used in 

calculating heading information. True sets geographic north 

as the north reference. Grid sets grid north as the north 

reference (000º). Magnetic sets the magnetic north as the 

north reference.

Position Format: Sets the position format in which a given 

location reading appears. Do not change this setting unless 

you are using a map or chart that specifies a different 

position format.

Map Datum: Sets the coordinate system on which the map is 

structured. Do not change this setting unless you are using a 

map or chart that specifies a different map datum.

Time Format: Sets a 12-hour, 24-hour, or UTC time format.
Time Zone: Sets the time zone.
Daylight Savings Time: Sets daylight savings time to Off or On.

You can set the temperature offset to compensate for the 

temperature reading from a temperature-capable sensor.

Measure the water temperature using the temperature-

capable transducer that is connected to the device.

Device Configuration

7